Prusa Slicer

Prusa Slicer is the version of 3d Slic3r adapted for the Prusa i3 MK3S

Prepping your 3d model for printing

1 Open the PrusaSlicer application,
2 Use the Add button to load models into PrusaSlicer
3 Delete Delete All buttons remove the model(s) from PrusaSlicer opens the detailed settings of print , filament and printer
4 Use Move, scale, rotate , Place on Face and cut tools to prepare the model to printing in the most efficient/ effective orientation,
5 Select a Quality / Speed setting for your print
6 Material selection
7 Select a Supports setting
8 Select an Infill percentage
9 Click Slice to slice the model into layers in the Z axis and select layers preview to view infill land
Check the Sliced Info for the cost and how long its going to take to print before exporting your gcode
The Edge charges 15cents / gram and your print needs to be finished before the Lab Closes - talk to the Fab Lab Supervisor if you have a long job you'd like to do .
11 Generate and export gcode to the SD Card by clicking the Export G-Code button .
Hint Right-click on model opens a context menu
Hint Switch between 3D editor and Layer Preview by clicking &
facilities/fablab/software/prusaslicer.txt · Last modified: 2019/06/18 16:35 by Andrei Maberley
CC Attribution-Share Alike 4.0 International Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International

We acknowledge Aboriginal and Torres Strait Islander peoples and their continuing connection to land and as custodians of stories for millennia. We are inspired by this tradition in our work to share and preserve Queensland's memory for future generations.