Differences

This shows you the differences between two versions of the page.

--- workshops:prototypes:deskduino_v2:start [2019/04/11 10:28]
Andrei Maberley [Deskduino V2]
+++ workshops:prototypes:deskduino_v2:start [2019/11/05 13:47]
pgullberg [Step Two: Assembly]
@@ Line 143: / Line 143: @@
   * **Board**  to **Arduino Nano** {{ :workshops:prototypes:wearables2-v3:badgeduino_arduino_02.png?nolink&600 |}}
-  * **Processor**  to **ATmega328** {{ :workshops:prototypes:wearables2-v3:badgeduino_arduino_03.png?nolink&600 |}}
+  * **Processor**  to **ATmega328** or ATmega328(Old Bootloader) if you have an older Nano{{ :workshops:prototypes:wearables2-v3:badgeduino_arduino_03.png?nolink&600 |}}
   * **Port**  to USB/Serial (different depending on OS and Chip)
       * If you are having problems finding a USB port you most likely need to download the correct drivers. <WRAP hideslide>Once again, the exact OS (and version) as well as the chip make a big difference.
@@ Line 187: / Line 187: @@
   * CS (Chip Select) → D9
   * GND (Ground) → GND
-  * VCC (Voltage) → 3V3
+  * VCC (Voltage) → VIN
 ===== Step Four - Using the Library and Project =====