Off-cut and odd size sheet storage for the Fabrication Lab Machine Shop, cut on the Mutlicam CNC with 15mm plywood. Two versions have been output, V1 has no back for deeper sheets.

V2 has no centre shelf for taller sheets.

Fusion 360 Model

The fusion360 model can be viewed and download from here. Use this file if you want to change dimensions or stock, etc..

http://a360.co/2FlvUEP

DXF Files

Use these files to cut on a CNC.

DXF files for V1

DXF files for V2 - with no shelf.

V Carve

Use these files to cut on State library's CNC at The Edge.

sheet_storage_crv.zip

The material is 15mm plywood, cut with a 6.25 (1/4 inch) bit.

  • facilities/fablab/fittings-custom/stock_storage.txt
  • Last modified: 2019/05/07 13:53
  • by Andrei Maberley