This is an old revision of the document!
Prusa i3 MK3s
The Prusa i3 MK3s is a successor to Original Prusa i3 MK3 with hardware and software upgrades, which lead to improved reliability and ease of use and assembly.
The Edge purchased 5 Prusa i3s to replace the ageing Up mini 2s.
Summery
- Build volume – (250(W) x 210(D) x 210(H) mm (11,025 cm3)
- 0.4mm nozzle
- PEI print surface
FILAMENT MATERIALS
The the Prusa i3 Mk3s can be set up to print using a range of filaments including:
| PLA | Polylactic acid (Starch based) |
| ABS | Acrylonitrile butadiene styrene |
| PETG | Polyethylene terephthalate (Glycol modified) |
| Nylon | Polyamide |
| Composite Materials | Often PLA with carbon fiber, metal or wood fill |
| HIPS | High-impact polystyrene |
| PVA | Polyvinyl acetate (Water-soluble Print support) |
| PP | Polypropylene |
For the full range, see: Supported Filaments
Overview
Maintenance
Manual
prusa3d_manual_mk3s_en_3_11.pdf
Elements of this wiki entry have been adapted from the Prusa 3D Manual Mk3S; English Edition, which is published under a CC attribution licence and is available here
