Differences

This shows you the differences between two versions of the page.

--- facilities:fablab:equipment-cots:hp_sprout_pro:start [2019/11/27 17:28]
Andrei Maberley
+++ facilities:fablab:equipment-cots:hp_sprout_pro:start [2019/11/28 10:03]
Andrei Maberley
@@ Line 88: / Line 88: @@
 Check with the Fabrication Lab supervisor whether the sprout has been used or calibrated recently.
-Turn on the Sprout
+Turn on the Sprout.
+Log in as edgeuser (password edgeuser)
 Close up the sides of the photobooth (leave the front and the vent on the top open)
 ====Scanning - Prep====
@@ Line 118: / Line 118: @@
 Start with the object in the start orientation
@@ Line 128: / Line 123: @@
 The Sprout uses a built in projector, touchmat and web camera.  The software used is [[https://support.hp.com/au-en/document/c05286558|HP 3D scan V5]] originally designed for stand alone scanners and cameras and developed by DAVID Laserscanners.  There is a wealth on information in the original DAVID forums both on [[http://forum.david-3d.com/viewforum.php?f=15&sid=e71691ec74c48935d090a1d74d4a2695|structured light]] and the [[http://forum.david-3d.com/viewforum.php?f=10&sid=e71691ec74c48935d090a1d74d4a2695|Shape Fusion app]].
 ======Important Notes=====
@@ Line 142: / Line 136: @@
 -------
 **If you experience any of the following symptoms, immediately stop using Sprout calibration or 3D scanning functionality and consult a physician:**
 ==== ====
@@ Line 182: / Line 175: @@
 =====Before you start====
-Ask the Fabrication Lab Supervisor if the Sprout has been used today or recently calibrated
+Ask the Fabrication Lab Supervisor if the Sprout has been used today or recently calibrated.
 The sprout structured light scanning works best with some ambient (non-direct) lighting. Open up the sides (not the top) of the photobooth before you start to scan.