====== Common Tabs & Functions ======


^ FUNCTION                                                    ^ NOTES  ^
| Function 01 - Machine Properties                            |        |
| Function 02 - Verify Job                                    |        |
| Function 03 - Machine Limits Control (Co-ordinate display)  |        |
| Function 05 - Execute M-Code                                |        |
| Function 06 - Execute G-Code                                |        |
| Function 09 - Abort Job                                     |        |
| Function 10 - Set User XY Origin"                           |        |
| Function 11 - Choose Current Origin                         |        |
| Function 12 - Seek Machine Origin                           |        |
| Function 13 - Go to Current Origin                          |        |
| Function 16 - Set Parking Position                          |        |
| Function 20 - Set Material Thickness                        |        |
| Function 24 - Set Tool Height of tangential knife heads     |        |
| Function 25 - Set Tool Height "                             |        |
| Function 27 - Set User Z Origin                             |        |
| Function 28 - Set and Plane Waste Board                     |        |
| Function 30 - Edit Tools                                    |        |
| Function 31 - Change Active Tool                            |        |
| Function 34 - Unload Spindles                               |        |
| Function 35 - Set dual carriage spacing                     |        |
| Function 40 - Current Job Properties                        |        |
| Function 41 - Feed Speed                                    |        |
| Function 42 - Spindle Control                               |        |
| Function 43 - Job Repeat                                    |        |
| Function 44 - Job Array                                     |        |
| Function 45 - Plunge Speed                                  |        |
| Function 46 - Measured Move                                 |        |
| Function 47 - Cut Rectangle                                 |        |
| Function 51 - Digitise 2D & 3D Jobs.                        |        |
| Function 54 - Safety Interlock                              |        |
| Function 56 - G41/G42 Compensation                          |        |
| Function 58 - Multi XML ControlFunction                     |        |
| Function 59 - G41/G42 Modal Preset "                        |        |
| Function 822 - Setting up Tangential Knives                 |        |
<sub>{{functions.odt|Original file}}</sub>
|
----

<WRAP center round box 60%>
**LINKS** 

[[facilities:fablab:equipment-cots:multicam_m-2412:cnc_router_operations|CNC Router Operations]]

[[facilities:fablab:equipment-cots:multicam_m-2412:other_operations_staff_only|Other Operations - Staff Only]]

[[http://wiki.edgeqld.org.au/doku.php?id=facilities:fablab:inductions:multicamcnc:start&s[]=induction#cnc_induction|Multicam CNC Induction]]


</WRAP>